Hello -- We are Techo Knights - Team #15256

-

SMITH TECHNO KNIGHTS 


Welcome.  We are Smith Techno Knights FTC Team.   This is our "Rookie Year".  We hope you will enjoy following our FTC journey and all the interesting things we've learned so far in our first season.

We just launched this blog on Friday 11/2, so we'll be adding lots of cool updates shortly.   We have 11 team members from 6th to 8th grade from Smith.  Two Coaches.  1 Parent Mentor, 3 High School FRC mentors and LOTS of parent volunteers that have been helping us get up to speed this season.

Check back next week - week 6 for our team - to see photos and information on our challenges and successes in modifying our basic Robot.  See how we went from our various paper design ideas to a cardboard prototype, then some rough models secured with duct tape and then creating a sheet metal component.   You'll see how it came together and what our current Robot looks like as tomorrow we will begin testing some programs we've been creating.   Wish us luck on our challenge!

Thank you to the Troy FRC Team for hosting weekly sessions at Troy High where we get to run our FTC Robot on an actual competition field.   We also borrowed some parts from Robot Garage when our initial orders of controllers and Rev Hub got delayed.  We've discovered that not everything works out like you plan but that you can overcome challenges with the right help.

Email us at SmithTechnoKnights@gmail.com to connect with us.

Plan to attend our Demo and Open House night at Smith Middle School in the Cafeteria.  It's on November 28th at 6:30pm - 8pm.  It's will be a fun, interactive night of Robotics and learning programming concepts.  You'll get to meet "Smitty" our Robot! 

Maybe you too might get excited and join a future Robotics team or even ours someday!

From East to West.  We are the Best!   Go Techno Knights!
(That's our team cheer we came up with early on as a team)

Coaches: Youngsoo and Besim
Mentor Kaushika
Team members: Anand, Astha, Ayush, Bakir, Jons, Kazim, Jaspreet, Nitya, Norbert, Sangeun and Sohan



Comments

Post a Comment

Popular posts from this blog

How our Robot Looked - Before and After By: ASTHA PATEL

-
“Smitty's" design evolution What we learned by building our arm, sweeper and “crate”           When we first started building our robot, we followed the instructions that were provided online to build the robot.  When we started using the robot we were finding some problems with the arm and sweeper.  So the way we solved this problem was we discussed as a team how to figure out what was the best way to solve this solution.            The kind of problems we had was that when we were using the sweeper we had zip ties on the sweeper so it was really hard to get the minerals in the arm.  So the way we solved this problem was that we tested different materials to act as our “sweeper” until we found the perfect match.          Another problem we had while using the robot is that we could carry at the most 2 blocks o...
Read more

What is a Rev Hub?

-
Image
By Jons The Rev Hub is very important in FTC robotics. It is important because it controls the robots motors, servos, and so much more.   It's basically like the "brains" of our Robot "Smitty".   As a team we didn't know what this was when we started.  But now after 10 weeks working on our FTC challenge preparation, we know what the ports are, where to plug in Servos vs. Motors and how critical it is to be careful with our Rev Hub.   We broke it by accident the first week of building and connecting it which was really stressful because one of our ports got broken and slipped inside the plastic box.  One of our dad's who is in engineer helped by opening it up and resetting the part and then we knew not to pull things in and out too hard when making connections with our wires onto the Rev Hub.
Read more